A friend of ours expressed his concerns a few days back:
“There’s a crack between the wall and the front door in my home. From what I can see, it’s only a few millimeters in extent. But there are places where it does kind of stick out.
I believe the door frame has also shrunk down a bit because of the weather conditions. And that seems to contribute to the crack and extend it further.
What would you suggest I do in this case?”
Well, we believe that’s just one way of putting the problem. There are certainly a lot of versions of the same issue. And we believe many of you have had experiences with them.
But, unfortunately, you haven’t found any suitable solutions yet.
Fortunately, we are here today to address this issue and the associated versions of it.
Throughout the course of today’s discussion, we will be talking about the cracks and their causes. Also, we will offer some helpful advice on how to tackle such problems yourself.
Let’s get started!
Table of Contents
Cracks around door frame: Reasons behind the annoyance
A while back, we did mention the word ‘Versions’. The reason behind it is simple-door cracks just don’t occur, there are reasons that are like catalysts.
- There is a significant thermal delta between a wall and a wooden door expansion. Wooden doors are more prone to expansions than walls, e.g. masonry walls.
- If the wood quality isn’t good enough, then the cracks become visible. It’s just a simple thing and is very common.
- Chemical reactions are also responsible for door frame cracks. This is largely due to the primer and paint that you apply. Such occurrences, though rare, do happen.
- Cracks in door frames occur in the rainy season on a daily basis. It happens because of the moisture absorption capabilities of wood. The wooden door absorbs the moisture, which can develop cracks in it.
- Other issues include poor workmanship and misplaced joints, which are very rare of course.
In the coming sections, we will discuss the ways you can repair cracks around the door frame. We will be breaking it down into sections, which will ultimately become a full-fledged set of rules to treat and avoid such annoyances.
How to repair cracks around door frame: Steps to make your life easier
Here is a set of steps that will help you treat the cracks between the wall and door frame joints.
We would like to clarify one thing before starting-these steps are purpose-designed for masonry structures. So, you may want to keep that in mind:
Step zero: measuring the crack with your eyeball
Eyeballing the crack is more than enough to find out the extent of the damage. Although it’s not the most efficient way of doing things, you can expect to have the efficiency you need.
Step one: Open up the crack with a saw
We are taking the crack to be noticeable.
For this reason, you would want to grab a saw and widen it up. Don’t go too far with this operation. Just 2-3 inches should be enough.
Step two: Fill the gap with a sealant
You need to do some research in this step.
Usually, apart from the cheaper options, you will find some really decent wood sealants that will get the job done. Just make sure the option you are going with is water and heat resistant. It will make sure you are free from corrosion for a good chunk of time.
Step three: Let it dry
In the case of regular sealants, you may want to wait several hours to a day to let it dry properly. The longer you wait, the better the results.
Step four: Sand the surface if necessary
The sealant you use will have instructions on whether or not you need to sand the surface. But, in general, you don’t need to sand the surface.
And that’s all there is to it.
There are two other methods which you can use as well:
- There is a process called ‘Epoxy Grouting’ which is known for hiding cracks and bringing back the old rigidity of the wooden door you are dealing with.
- You can always use Resin-based sealants for larger cracks.
Fixing a cracked door frame: the DIY approach
So how would you fix the cracks on the wooden door all by yourself? We believe these steps from experts can help you out with the job:
- Identify the crack and eyeball it.
- Add some wood filler and let it dry for 3-4+ hours.
- Get your hands on a clamp with rubber edges.
- Use the clamp to attach the cracked door frame together.
- You need to let the clamp hold itself for a couple of hours.
- After the filler is dry, scrape off any excess with a scraper tool.
- Sanding the surface will give you a cleaner finish.
- Painting it further is entirely up to you.
- If the paint is applied, then wait a couple of hours to let it dry.
The finished result is actually very astonishing. You will find that you’ve made a good change and almost eliminated any footprint of the crack.
Door frame cracks: Prevention is the best key
You don’t really have any control over the weather. So, chances are you won’t be able to stop something that inevitable like moisture accumulation and other changes caused by the weather.
Make sure everything is seated properly
Usually, with doors and other such contraptions, proper seating of the joints is necessary. And that can eliminate the cracking in a good way.
Use white cement or other such sealants
You could use white cement to hide away the smaller cracks. Also, applying paint on it may add some aesthetic value to it as well.
Keep it polished
Always keep your wooden doors polished. This makes a great impact in the long run.
We don’t claim to be experts on eliminating cracks around door frame.
But that doesn’t mean we can’t share useful information with you.
The steps and remedies we showed you today have been tested and vetted by professionals who know what they are doing. We just took the responsibility onto ourselves.
We’ll let you be the judge of how well we did. Goodbye.
Check other resources related to home improvement :
- Primer Not Sticking to Wood- Possible ways to find your way around it! - February 6, 2021
- Portable Air Conditioner Not Evaporating- How Do You Get Around This? - February 5, 2021
- How to fill cracks around door frames - February 5, 2021